16' 4H Bumper Pull Trailer 

Check out this bumper pull design. This 4-horse model comes standard with a full tack compartment up front that has a four tier saddle rack accessible from both sides of the trailer. Inside it has a full straight divider in between the first two stalls and has a half cut gate in the center of the trailer as a divider from the front and the rear. It is ideal for hauling two to three horses at one time but does have enough space for four horses to be hauled on short distances. Call Brad for more details.

All Double D Trailers are now built with the new **NO Rust Galvaneal metal and painted with an electrostatic paint system. All metal is stored indoors so there is no rust on the trailers when they roll out of the factory...everything is washed with a steamer and iron phosphate to open up the pores of the metal to allow the primer to stick better, and to remove oil residue. Once that dries, all the seams are sealed with 3M sealant inside and out. Then we prime with two coats of Valspar, automotive primer and paint with three coats of Valspar automotive paint. End result is a very durable, smooth, shining, long lasting finish.  

Features & Options:

Standard Features:

Optional Features:

Floor Plan:

Images:
(Click small thumbnail picture for larger photo)

New Smooth skin design for longer lasting, includes wide graphics	Spare tire standard, shown with optional chrome wheels	Side escape door	Inside view, swinging divider and full height side exit door
Close up of feed mangers and tack storage, has the same set up with doors on both sides, total of four doors on the front.	Bridle hooks, lights, plenty of room.	Swinging and removable divider for those hard to load horses.	Padded butt and breast bars
Center gate closes to keep the horses in the front from kicking the one in the back.	Galvanized latches.	Rubber Bumper	Diamond Plate everywhere for long lasting.